| AutoJet
Zoned Cooling Spray System
Turnkey
system provides even cooling across the width of your product
 |
|
Click
to view larger image
|
If temperature variations across the width of your product can
dramatically affect product quality or production rates, a zoned
cooling system could solve your problems.
See
an AutoJet Zoned Cooling Spray System in action!
The AutoJet Zoned Cooling Spray System is a turnkey system that
provides even cooling across the entire width of your product while
minimizing total water usage.
As the material enters the cooling section, initial cooling is
provided in three adjacent spray zones or "lanes". To
achieve a more uniform temperature profile, the web is then divided
into four spray zones and each is cooled independently using multiple
spray headers. (NOTE: The number and dimension of zones can be adjusted
based on the width of your production line.)
In each zone, as the material heats up, the corresponding spray nozzles
in that "lane" increase their flow to increase the cooling
effect. As the product reaches optimum tempterature, flow rate is decreased.
Temperature variations across the web are eliminated and the product
exits the cooling section at optimum temperature. Water usage is minimized
and most cooling water is evaporated, eliminating cleanup hassles.
The AutoJet Zoned Cooling Spray System is ideal for cooling products
such as:
- Roofing
shingles and membranes
- Aluminum sheet
- Extruded plastic or rubber sheets or films
- PVC coated sheet metal
- Copper and brass alloys on mill run-out table
- Ceiling tile panels
|
