|
AutoJet
Spray Controllers - Basic Spray Control
 Basic
Modular Spray Systems with manual control packages eliminate the
design, specification and installation processes that often overload
in-house engineering and maintenance staff. Just provide operating
requirements and your sales engineer will configure your Modular
Spray System using standard spray component kits.
Systems
typically include:
- Spray
nozzles and hook-up kits
- Stainless
steel pressure tanks
- Ball
valves, check valves, solenoid valves
- Liquid
strainers
- Liquid
and air pressure regulators
- Gauges
- Proximity
sensors
System
components are typically enclosed in a single panel for easy wall-mounting.
Panel enclosures are NEMA-12 rated (IP54) and are available in plastic,
painted steel or stainless steel.
Typical
Applications
Lubricating
Metal Stampings
Problem:
An automotive parts manufacturer needed a uniform coating of lubricant
on a wide variety of metal stampings. They also wanted to reduce
their oil consumption and eliminate misting.
Solution:
An AutoJet Modular Spray System equipped with 1/4JAUMCO metering
air atomizing nozzles sprays a fine mist of oil on the parts when
triggered by a signal from the stamping press. Since installing
this system, the customer has reduced oil consumption by 40%.
Oiling
Bakery Products
Problem:
A bakery equipment OEM needed a simple system to spray oil on baked
goods as they move on a conveyor belt. It was important that the
oil be applied evenly and that production not be interrupted to
replenish the oil supply.
Solution:
An AutoJet Modular Spray System was configured with five air atomizing
nozzles activated by a proximity sensor. The oil is supplied from
two pressure pots operating in parallel so that one is always operating
and the spray process does not have to be interrupted to refill
the tanks.
|
