|
System
Features
- Simple,
cost-effective method for implementing PWM Flow Control
- Drives
Spraying System Co. PulsaJet Automatic Spray Nozzles to
maximum cycle speed of 10,000 cycles per minute
- Drives
up to 16 PulsaJet Automatic Spray Nozzles connected in parallel
- Built-in
AutoJet Model 1008-PWM Module Panel contains power supply,
fuses and all necessary equipment for “plug-and-spray”
operation
- Application
Security - Duty cycle can be set by dial on the front panel
or inside, depending on a selector switch inside the panel
|
|
| The
Benefits of Pulse Width Modulated (PWM) Flow Control
By
cycling the spray nozzle quickly at a controlled frequency
while adjusting the duty cycle, very precise flow rate
are maintained. For a duty cycle of 50%, the nozzle
is spraying half the time and the flow will be 50% of
the maximum flow rate at a given pressure for the nozzle.
Using
PWM Flow Control:
- Relatively
low flow rates can be generated with larger, clog-resistant
spray tips
- Overspray
is minimized
- Chemical
consumption can be reduced
- Extremely
high flow turndown ratios can be achieved at a single
pressure
|
|
